Click here

REAR SEAT OUTER BELT ASSEMBLY INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL REAR SEAT OUTER BELT ASSEMBLY


    1. A01NKJCE01

      Install the rear seat outer belt assembly with the 2 bolts.

      <A>
      7.5 N*m 77 kgf*cm 66 in.*lbf
      <B>
      42 N*m 428 kgf*cm 31 ft.*lbf
    2. A01NMGL

      Connect the connector and lock the locking button as shown in the illustration.

      CAUTION:

      Securely lock the locking button.

    3. A01NLZB

      Connect the shoulder anchor of the rear seat outer belt assembly with the bolt.

      42 N*m 428 kgf*cm 31 ft.*lbf
    4. Check if the ELR locks.

      Note:

      The check should be performed with the outer belt assembly installed.


      1. With the belt assembly installed, check that the belt locks when it is pulled out quickly.

  2. Click here

    INSTALL ROOF SIDE INNER GARNISH ASSEMBLY


    1. Pass the floor anchor of the rear seat outer seat belt assembly LH through the roof side inner garnish assembly LH.

    2. A01NIKV

      Engage the claw and 8 clips to install the roof side inner garnish assembly LH.

  3. Click here

    CONNECT REAR SEAT OUTER BELT ASSEMBLY


    1. A01NICRE01

      Connect the floor anchor end of the rear seat belt assembly and install the bolt.

      Table 1. Text in Illustration
      *1 Protruding Part
      42 N*m 428 kgf*cm 31 ft.*lbf
      Note:

      Do not allow the anchor part of the rear seat outer belt assembly to overlap the protruding part of the floor panel.

  4. Click here

    INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)


    1. Connect each connector.

    2. Engage the 2 clips and the 5 claws.

    3. A01NLMP

      Install the deck trim side panel assembly LH with the 2 bolts and 4 clips.

  5. Click here

    INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)


    1. Connect the connector.

    2. Engage the 2 clips and the 5 claws.

    3. A01NL5Y

      Install the deck trim side panel assembly RH with the 2 bolts and 5 clips.

  6. Click here

    INSTALL HEIGHT CONTROL SWITCH (for RH Side)


    1. w/ Air Suspension:


      1. Install the height control switch (Click here).

  7. Click here

    INSTALL RECLINING REMOTE CONTROL BEZEL


    1. A01NLC2

      Engage the 4 claws and install the reclining remote control bezel LH.

  8. Click here

    INSTALL ROPE HOOK ASSEMBLY


    1. A01NJ4O

      Install the 2 rope hook assemblies with the 2 bolts.

    2. Engage the 2 claws.

  9. Click here

    INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side)


    1. A01NJN3

      Install the No. 1 luggage compartment trim hook as shown in the illustration.

  10. Click here

    INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side)


    1. A01NL62

      Install the No. 1 luggage compartment trim hook as shown in the illustration.

  11. Click here

    INSTALL REAR SEAT SIDE COVER


    1. A01NJHB

      Engage the 2 claws and 3 clips.

    2. Install the rear seat side cover LH with the 2 clips.

  12. Click here

    INSTALL REAR FLOOR FINISH SIDE PLATE


    1. A01NLJE

      Engage the guide.

    2. Engage the claw and 2 clips.

    3. Install the rear floor finish side plate LH with the clip.

  13. Click here

    INSTALL REAR FLOOR FINISH PLATE


    1. A01NMPW

      Engage the 6 clips, 2 claws and 2 guides, and install the rear floor finish plate.

  14. Click here

    INSTALL REAR DOOR SCUFF PLATE


    1. A01NIFR

      Engage the 3 clips, guide and 6 claws, and install the rear door scuff plate LH.

  15. Click here

    INSTALL REAR SEAT ASSEMBLY LH (for LH Side)


    1. Install the rear seat assembly LH (Click here).

  16. Click here

    INSTALL REAR SEAT ASSEMBLY RH (for RH Side)


    1. Install the rear seat assembly RH (Click here).

  17. Click here

    INSTALL FRONT DECK FLOOR BOX (for LH Side)


    1. A01NN39

      Install the front deck floor box with the clip.

  18. Click here

    INSTALL DECK SIDE TRIM BOX LH (for LH Side)


    1. for Compact Spare Tire:


      1. Install the deck side trim box LH (Click here).

  19. Click here

    INSTALL DECK SIDE TRIM BOX LH (for LH Side)


    1. for Full Size Spare Tire:


      1. Install the deck side trim box LH (Click here).

  20. Click here

    INSTALL NO. 4 REAR FLOOR BOARD (for LH Side)


    1. for Compact Spare Tire:


      1. Install the No. 4 rear floor board (Click here).

  21. Click here

    INSTALL NO. 4 REAR FLOOR BOARD (for LH Side)


    1. for Full Size Spare Tire:


      1. Install the No. 4 rear floor board (Click here).

  22. Click here

    INSTALL DECK SIDE TRIM BOX RH (for RH Side)


    1. for Compact Spare Tire:


      1. Install the deck side trim box RH (Click here).

  23. Click here

    INSTALL DECK SIDE TRIM BOX RH (for RH Side)


    1. for Full Size Spare Tire:


      1. Install the deck side trim box RH (Click here).

  24. Click here

    INSTALL NO. 3 REAR FLOOR BOARD (for RH Side)


    1. for Compact Spare Tire:


      1. Install the No. 3 rear floor board (Click here).

  25. Click here

    INSTALL NO. 3 REAR FLOOR BOARD (for RH Side)


    1. for Full Size Spare Tire:


      1. Install the No. 3 rear floor board (Click here).

  26. Click here

    INSTALL SPARE WHEEL COVER ASSEMBLY (for RH Side)


    1. for Compact Spare Tire:


      1. Install the spare wheel cover assembly (Click here).

  27. Click here

    INSTALL DECK BOARD SUB-ASSEMBLY


    1. for Compact Spare Tire:


      1. A01NM7R

        Install the deck board sub-assembly with the 2 bolts.

    2. for Full Size Spare Tire:


      1. A01NM92

        Install the deck board sub-assembly with the 2 bolts.

    3. A01NIMA

      Engage the 3 fasteners as shown in the illustration.

  28. Click here

    INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Install the tonneau cover assembly.

  29. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  30. Click here

    INSTALL REAR DECK FLOOR BOX


    1. A01NIBL

      Install the rear deck floor box with the 3 clips.

  31. Click here

    INSPECT SRS WARNING LIGHT


    1. Inspect the SRS warning light (Click here).