Click here

ELECTRONICALLY CONTROLLED BRAKE SYSTEM, Diagnostic DTC:36, 43

Click here
Click here Click here
DTC Code DTC Name
36 ABS Control System Malfunction
43 ABS Control System Malfunction
Click here

DESCRIPTION

These DTCs are stored if the VSC and/or electronically controlled brake system detects a malfunction in the ABS control system.

DTC Code INF Code DTC Detection Condition Trouble Area
36 - Malfunction in the ABS control system. ABS control system
43 - Malfunction in the ABS control system. ABS control system
Click here

INSPECTION PROCEDURE

Note:

When replacing the skid control ECU, perform initialization and calibration of the linear solenoid valve (Click here).

Click here

PROCEDURE


  1. Click here

    CHECK ABS CONTROL SYSTEM


    1. Clear the DTCs (Click here).

    2. Turn the power switch on (READY).

    3. Drive the vehicle at a speed of approximately 40 km/h (25 mph) or more for 60 seconds or more.

    4. Check if the same DTC is recorded (Click here).

      Result
      Result Proceed to
      DTC (ABS control system DTC) is not output A
      DTC (ABS control system DTC) is output B

  2. Click here

    RECONFIRM DTC


    1. Turn the power switch off.

    2. Clear the DTCs (Click here).

    3. Turn the power switch on (READY).

    4. Drive the vehicle at a speed of approximately 40 km/h (25 mph) or more for 60 seconds or more.

    5. Check if the same DTC is recorded (Click here).

      Result
      Result Proceed to
      DTCs (36 and 43) are not output A
      DTCs (36 and/or 43) are output B

  3. Click here

    CHECK FOR INTERMITTENT PROBLEMSClick here

  4. Click here

    REPAIR CIRCUITS INDICATED BY OUTPUT DTCSClick here

  5. Click here

    REPLACE SKID CONTROL ECUClick here