TIRE PRESSURE WARNING ANTENNA INSTALLATION


  1. INSTALL TIRE PRESSURE WARNING ANTENNA


    1. A01NIT9

      Connect the connector to the tire pressure warning antenna.

    2. A01NIC3

      Engage the 2 hooks to temporarily install the tire pressure warning antenna.

    3. Install the bolt.

      Torque:
      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

  2. INSTALL ROOF HEADLINING ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here