ECM СНЯТИЕ


  1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT


    1. Снимите напольный коврик багажного отделения.

  2. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH


    1. Снимите левую облицовочную накладку багажного отделения.

  3. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  4. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE ENGINE ROOM SIDE COVER


    1. A01FTR0

      Освободите 4 фиксатора и снимите боковую крышку моторного отсека.

  6. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A01FS00

      Снимите 7 фиксаторов и сальник впускного воздухопровода холодного воздуха.

  7. REMOVE ECM


    1. A01FT03

      Disconnect the wire harness clamp.

    2. Push the locks on the 2 levers, raise the 2 levers, and disconnect the 2 ECM connectors.

      Note

      After disconnecting the ECM connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the ECM connectors.

    3. A01FVH4

      Disconnect the 2 wire harness clamps.

    4. A01FSHD

      Remove the 2 nuts and ECM.

      Note

      If the ECM has been struck or dropped, replace it.

  8. REMOVE ECM BRACKET


    1. A01FSXV

      Remove the 2 bolts and ECM bracket from the engine room ECU box.

  9. REMOVE NO. 2 ECM BRACKET


    1. A01FT8U

      Remove the 2 bolts and No. 2 ECM bracket from the engine room ECU cover.

  10. REMOVE ENGINE ROOM ECU COVER


    1. A01FQZO

      Detach the 3 claws to remove the engine room ECU cover from the engine room ECU box.

  11. REMOVE ENGINE ROOM ECU BOX


    1. Remove the engine room ECU box from the ECM.