ГИДРАВЛИЧЕСКИЙ КЛАПАН ИЗМЕНЕНИЯ ФАЗ УСТАНОВКА


  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. for Intake Side:


      1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.

      2. Install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.

        Torque:
        10 N*m  { 102 kgf*cm, 7 ft.*lbf }

        Note


        • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

        • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.

      3. Connect the camshaft timing oil control valve assembly connector.

    2. for Exhaust Side:


      1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.

      2. Install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.

        Torque:
        10 N*m  { 102 kgf*cm, 7 ft.*lbf }

        Note


        • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

        • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.

      3. Connect the camshaft timing oil control valve assembly connector.

  2. INSPECT FOR OIL LEAK


    1. Put the engine in inspection mode (maintenance mode) Click here

    2. Start the engine. Make sure that there are no oil leaks from the area that was worked on.

  3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01FRJ8E01
      Обозначения на рисунке
      *a Наконечник (круглая часть)

      Установите крышку двигателя № 1 в сборе и введите в зацепление 3 фиксатора в порядке, показанном на рисунке.

      Note


      • Надежно присоедините фиксаторы.

      • Если закреплять фиксаторы с усилием или подвергать их ударам, они могут получить повреждения.