HEADLIGHT ASSEMBLY (for LED Headlight) REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT


    1. Remove the luggage compartment floor mat.

  3. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH


    1. Remove the luggage compartment trim cover LH.

  4. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE FRONT BUMPER COVER


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here

  6. REMOVE UPPER FRONT FENDER PROTECTOR LH


    1. A01FQKN

      Detach the 3 clips and remove the upper front fender protector LH.

  7. REMOVE HEADLIGHT ASSEMBLY LH


    1. A01FVENE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the headlight assembly LH.

    2. Disconnect the connector.

    3. Remove the 4 bolts and headlight assembly LH.