AIR FUEL RATIO SENSOR INSTALLATION

INSTALL AIR FUEL RATIO SENSOR

1. 

   Text in Illustration

   *1	Fulcrum Length

   for Bank 2 Sensor 1:

   Using SST, install the air fuel ratio sensor to the exhaust manifold LH.

   SST

   09224-00010

   Torque:

   without SST

   44 N*m  { 449 kgf*cm, 32 ft.*lbf }

   with SST

   40 N*m  { 408 kgf*cm, 30 ft.*lbf }

   Tech Tips

   
   

   • Use a torque wrench with a fulcrum length of 300 mm (11.8 in.). When using a torque wrench with a fulcrum length that is not 300 mm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification Click here.

   • Make sure SST and the wrench are connected in a straight line.

   • Perform "Inspection After Repairs" after replacing the air fuel ratio sensor Click here.

2. Connect the connector.

3. 

   Text in Illustration

   *1	Fulcrum Length

   for Bank 1 Sensor 1:

   Using SST, install the air fuel ratio sensor to the exhaust manifold RH.

   SST

   09224-00010

   Torque:

   without SST

   44 N*m  { 449 kgf*cm, 32 ft.*lbf }

   with SST

   40 N*m  { 408 kgf*cm, 30 ft.*lbf }

   Tech Tips

   
   

   • Use a torque wrench with a fulcrum length of 300 mm (11.8 in.). When using a torque wrench with a fulcrum length that is not 300 mm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification Click here.

   • Make sure SST and the wrench are connected in a straight line.

   • Perform "Inspection After Repairs" after replacing the air fuel ratio sensor Click here.

4. Connect the connector.

INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH

Click here

INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH

Click here