CAMSHAFT OIL CONTROL VALVE INSTALLATION


  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. for Intake Side:


      1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.

      2. Install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.

        Torque:
        10 N*m  { 102 kgf*cm, 7 ft.*lbf }

        Note


        • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

        • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.

      3. Connect the camshaft timing oil control valve assembly connector.

    2. for Exhaust Side:


      1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.

      2. Install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.

        Torque:
        10 N*m  { 102 kgf*cm, 7 ft.*lbf }

        Note


        • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

        • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.

      3. Connect the camshaft timing oil control valve assembly connector.

  2. INSPECT FOR OIL LEAK


    1. Put the engine in inspection mode (maintenance mode) Click here

    2. Start the engine. Make sure that there are no oil leaks from the area that was worked on.

  3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01FRJ8E01
      Text in Illustration
      *a Tip (Round Portion)

      Attach the 3 clips in the order shown in the illustration to install the No. 1 engine cover sub-assembly.

      Note


      • Securely engage the clips.

      • If the clips are forcibly attached or struck with an object, they may be damaged.