INTRUSION SENSOR REMOVAL


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE MAP LIGHT ASSEMBLY

    Click here

  4. REMOVE THEFT WARNING RADAR SENSOR


    1. Disconnect the connector.

    2. A01FIWJ

      Detach the 4 clamps from wire harness.

    3. Remove the 6 screws and theft warning radar sensor.