NAVIGATION ANTENNA REMOVAL


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  4. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

    A01FF76

    1. Remove the screw <F>.

    2. Detach the claw and 2 guides and remove the No. 2 side defroster nozzle duct.

  5. REMOVE NO. 3 HEATER TO REGISTER DUCT

    A01FG5U

    1. Remove the 3 screws <F> and No. 3 heater to register duct.

  6. REMOVE NAVIGATION ANTENNA ASSEMBLY (for LHD)


    1. Detach the 4 clamps.

      A01FIUD

    2. Remove the 2 screws remove the navigation antenna.

  7. REMOVE NO. 1 HEATER TO REGISTER DUCT (for RHD)

    A01FGFI

    1. Remove the 3 screws <F> and No. 1 heater to register duct.

  8. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT (for RHD)

    A01FI9T

    1. Remove the screw <F>.

    2. Detach the claw and 2 guides and remove the No. 1 side defroster nozzle duct.

  9. REMOVE DEFROSTER NOZZLE ASSEMBLY (for RHD)

    A01FELH

    1. Detach the clamps.

    2. Remove the 3 screws <F> and defroster nozzle assembly.

  10. REMOVE NAVIGATION ANTENNA ASSEMBLY (for RHD)


    1. Detach the 5 clamps.

      A01FI6M

    2. Remove the 2 screws remove the navigation antenna.