SHIFT PADDLE SWITCH INSTALLATION


  1. INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY


    1. Connect the 2 No. 1 switch wire connectors to the 2 transmission shift switch assembles.

      Note

      Make sure to only connect the connectors to each corresponding color.

    2. Install the 2 transmission shift switch assembles assembly with the 2 screws.

    3. Connect the connector and attach the 4 guides to install the No. 1 switch wire.

  2. INSTALL LOWER NO. 1 STEERING WHEEL BOSS COVER


    1. Install the lower No. 1 steering wheel boss cover with the 2 screws.

  3. INSTALL STEERING WHEEL ASSEMBLY


    1. Align the matchmarks on the steering wheel assembly and steering main shaft assembly.

    2. Install the steering wheel assembly set nut.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

    3. Connect the connectors to the spiral cable.

  4. INSTALL STEERING PAD SWITCH ASSEMBLY

    Click here