TIRE PRESSURE WARNING RECEIVER (for FMVSS138 Type) REMOVAL


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE LUGGAGE COMPARTMENT TRIM INNER COVER RH

    Click here

  4. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER


    1. Disconnect the 2 connectors.

    2. A01FEO0

      Remove the bolt and tire pressure warning ECU and receiver.