AUDIO AND VISUAL SYSTEM (for Radio and Display Type) Cellular Phone Inspection

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK USAGE CONDITION


    1. Check that the vehicle and cellular phone meet the following conditions:

      Note

      If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.


      • The cellular phone is "Bluetooth" compatible Click here.

      • The cellular phone is registered as a hands-free device.

      • "Bluetooth" setting of the cellular phone is on.

      • Operating system and software of the cellular phone are the latest versions.

      • There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.

    2. Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

      Result
      Result Proceed to
      The cellular phone is connected correctly. A
      The cellular phone is not connected correctly. B

    B

    RESTART CELLULAR PHONE Click here

    A

    END

  2. RESTART CELLULAR PHONE


    1. Restart the cellular phone.

    2. Turn the ignition switch off.

    3. Turn the ignition switch to ACC.

    4. Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

      Result
      Result Proceed to
      The cellular phone is connected correctly. A
      The cellular phone is not connected correctly. B

    B

    CHECK RECEPTION Click here

    A

    END

  3. CHECK RECEPTION


    1. Check if the in-vehicle device can be recognized by the cellular phone.

      Result
      Result Proceed to
      In-vehicle device can be recognized. A
      In-vehicle device cannot be recognized. B

    B

    CHECK USING ANOTHER VEHICLE Click here

    A

  4. REGISTER AGAIN


    1. Clear all "Bluetooth" devices registered to the cellular phone and the radio and display receiver assembly.

    2. Register the cellular phone again.

    3. Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

      Result
      Result Proceed to
      The cellular phone is connected correctly. A
      The cellular phone is not connected correctly. B

    B

    CHECK USING ANOTHER VEHICLE Click here

    A

    END

  5. CHECK USING ANOTHER VEHICLE


    1. Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.

      Tech Tips


      • Make sure to obtain the customer's permission to perform this procedure.

      • After the inspection, clear the registered information and usage history acquired during the inspection.

      Result
      Result Proceed to
      The cellular phone is connected correctly. A
      The cellular phone is not connected correctly. B

    B

    CHECK USING ANOTHER CELLULAR PHONE Click here

    A

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

  6. CHECK USING ANOTHER CELLULAR PHONE


    1. Check if the system functions normally using another "Bluetooth" compatible cellular phone.

      Tech Tips


      • Make sure to obtain the customer's permission to perform this procedure.

      • After the inspection, clear the registered information and usage history acquired during the inspection.

      Result
      Result Proceed to
      The cellular phone is connected correctly. A
      The cellular phone is not connected correctly. B

    B

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    A

    END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)