BRAKE PEDAL(for RHD) REMOVAL

PROCEDURE


  1. REMOVE COMBINATION METER ASSEMBLY

    Click here

  2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY (w/ Knee Airbag)

    Click here

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)

    Click here

  4. REMOVE INSTRUMENT PANEL UNDER TRAY (w/o Knee Airbag)

    Click here

  5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (w/o Knee Airbag)

    Click here

  6. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. A005M8R

      Disconnect the connector from the stop light switch.

    2. Disengage the harness clamp from the pedal support.

    3. A005LDW

      Turn the stop light switch counterclockwise and remove the stop light switch.

  7. SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS


    1. A005JM4

      Remove the brake pedal return spring.

    2. Remove the clip and the push rod pin and separate the push rod clevis from the brake pedal.

  8. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY


    1. A005LUY

      Remove the wire harness clamp.

    2. Remove the 4 nuts and bolt and remove the pedal support.