PROCEDURE
REMOVE NO. 1 METER HOOD CLUSTER
REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
*1 | Protective Tape |
Apply protective tape, as shown in the illustration.
*1 | Moulding Remover |
Using a moulding remover, disengage the 7 clips and the guide to remove the instrument cluster finish panel assembly in the direction indicated by the arrow as shown in the illustration.
REMOVE COMBINATION METER ASSEMBLY
Remove the 2 screws.
Disengage the 2 clips.
Disconnect the 2 connectors and remove the combination meter assembly.