BRAKE PEDAL(for LHD) REMOVAL

PROCEDURE


  1. REMOVE COMBINATION METER ASSEMBLY

    Click here

  2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY

    Click here

  3. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. A005KT1

      Disconnect the connector from the stop light switch assembly.

    2. Disengage the harness clamp from the pedal support.

    3. A005HU8

      Turn the stop light switch counterclockwise and remove the stop light switch assembly.

  4. SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS


    1. A005IYS

      Remove the brake pedal return spring.

    2. Remove the clip and push rod pin and separate the push rod clevis from the brake pedal.

  5. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY


    1. A005J7F

      Remove the 4 nuts and bolt and remove the pedal support.