PROCEDURES NECESSARY WHEN CABLE IS DISCONNECTED/RECONNECTED TO BATTERY TERMINAL
| System Name | See Procedure |
|---|---|
| Stop and Start System | (for 1NR-FE) |
| (for 1NZ-FE) |
PROCEDURES NECESSARY WHEN ECU OR OTHER PARTS ARE REPLACED
| Replacement Part | Necessary Procedure | Effect or Inoperative Function when Necessary Procedure is not Performed | See Page |
|---|---|---|---|
| ECM (for 1ND-TV) |
|
|
|
| ECM (for 1NR-FE) |
|
|
|
| ECM (for 1NZ-FE) |
|
|
|
| Injector assembly (for 1ND-TV) |
|
|
|
| Air fuel ratio sensor (for 1ND-TV) | A/F Sensor Compensation Reset |
|
|
| DPF catalyst (for 1ND-TV) | DPF Deterioration Record Clear |
|
|
| Engine assembly (for 1ND-TV) |
|
|
|
|
|
Engine starting | |
|
Inspection after repairs | - | |
|
Inspection after repairs | - | |
| Engine stop and start ECU |
|
Stop and Start System | (for 1NR-FE) |
| (for 1NZ-FE) |
|||
| Starter assembly | Clear number of starter operations | Stop and Start System | |
|
|
|
|
|
|
|
|
w/ VSC |
|
|
|
w/o VSC |
|
|
|
w/o VSC |
|
|
|
w/ VSC |
|
|
|
|
Calibration |
|
|
w/ entry and start system |
|
|
Refer to the Service Bulletin for the registration procedure. |
w/o entry and start system |
ECU communication ID registration |
|
Refer to the Service Bulletin for the registration procedure. |
| w/ automatic light control system Main body ECU (Multiplex network body ECU) |
Determination of automatic light control function | Customizing function of lighting system (automatic light control sensitivity adjustment) | |
| Power window regulator motor | Motor initialization |
|
|
|
Sliding roof drive gear initialization |
|
|
|
Headlight leveling ECU initialization | Headlight leveling function |