FUEL LID LOCK CONTROL CABLE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE DECK BOARD ASSEMBLY

    Click here

  2. REMOVE SPARE WHEEL COVER

    Click here

  3. REMOVE FRONT SEAT ASSEMBLY

    Click here

  4. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

    Click here

  5. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

    Click here

  6. REMOVE CENTER FRONT FLOOR COVER (for FrontFloor Cover Type B)

    Click here

  7. REMOVE FRONT FLOOR COVER RH

    Remove the front floor cover RH (for Front Floor Cover Type A). Click here

    Remove the front floor cover RH (for Front Floor Cover Type B). Click here

  8. REMOVE FRONT FLOOR COVER LH

    Remove the front floor cover LH (for Front Floor Cover Type A). Click here

    Remove the front floor cover LH (for Front Floor Cover Type B). Click here

  9. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  10. REMOVE FRONT DOOR SCUFF PLATE RH

    Click here

  11. REMOVE FRONT DOOR SCUFF PLATE LH

    Tech Tips

    Use the same procedure as for the RH side.

  12. REMOVE COWL SIDE TRIM BOARD RH

    Click here

  13. REMOVE COWL SIDE TRIM BOARD LH

    Tech Tips

    Use the same procedure as for the RH side.

  14. REMOVE REAR DOOR SCUFF PLATE RH

    Click here

  15. REMOVE REAR DOOR SCUFF PLATE LH

    Tech Tips

    Use the same procedure as for the RH side.

  16. REMOVE REAR FLOOR FINISH PLATE

    Click here

  17. SEPARATE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side Click here

  18. SEPARATE REAR DOOR OPENING TRIM WEATHERSTRIP


    1. Separate the rear door opening trim weatherstrip.

  19. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  20. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side Click here

  21. REMOVE JACK COVER

  22. REMOVE JACK ASSEMBLY

  23. REMOVE NO. 2 FLOOR CARPET HOOK

    Tech Tips

    Use the same procedure for both sides.


    1. A01UXV3

      Rotate the No. 2 floor carpet hook 90° in the direction shown by the arrow in the illustration, disengage the hook, and remove the No. 2 floor carpet hook.

  24. REMOVE FRONT FLOOR CARPET ASSEMBLY


    1. Disengage the 6 clamps.

    2. Remove the 2clips and front floor carpet.

  25. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. A01UXIT

      Remove the bolt.

    2. Slide the fuel lid lock open lever as indicated by the arrow as shown in the illustration.

    3. A01UY7U

      Disengage the guide and separate the fuel lid lock control cable.

  26. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for LHD)


    1. A01V1YS

      Disengage the 2 claws and separate the fuel lid lock control cable.

    2. Disengage the 4 clamps and remove the fuel lid lock control cable as shown in the illustration.

      A01V11NE01
      Text in Illustration
      *1 Fuel Lid Lock Control Cable Sub-assembly *2 Wire Harness Clamp

  27. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for RHD)


    1. A01V1YS

      Disengage the 2 claws and separate the fuel lid lock control cable.

    2. Disengage the 7 clamps and remove the fuel lid lock control cable as shown in the illustration.

      A01V0GZE01
      Text in Illustration
      *1 Fuel Lid Lock Control Cable Sub-assembly *2 Wire Harness Clamp

  28. REMOVE FUEL FILLER OPENING LID LOCK RETAINER


    1. A01UYAPE01
      Text in Illustration
      *1 Claw A
      *a Slit
      *b Rotate

      Rotate the fuel filler opening lid lock retainer by 90° and disengage the 2 claws A from the 2 slits as shown in the illustration.

    2. A01V24CE01
      Text in Illustration
      *1 Claw B
      *a Slit
      *b Rotate

      Rotate the fuel filler opening lid lock retainer by another 90° and remove it by disengaging the 2 claws B from the 2 slits as shown in the illustration.