FRONT DOOR SPEAKER INSTALLATION

PROCEDURE


  1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY


    1. A004FDZE04

      Engage the guide and claw to temporarily install the front No. 1 speaker assembly.

    2. Using an air riveter or hand riveter, install the front No. 1 speaker assembly with 3 new strike rivets.

      Tech Tips

      Install the new strike rivets in the order shown in the illustration.

      Note


      • Do not touch the cone part of the front No. 1 speaker assembly.

      • A004EZSE08

        Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

        Text in Illustration
        *1 Mandrel
        *a Riveter
        *b Incorrect
        *c Correct
      • A004G1EE01

        Confirm that the rivets are seated properly against the front No. 1 speaker assembly.

        Text in Illustration
        *a Riveter
        *b Incorrect
        *c Correct

      • Do not tilt the riveter when installing the rivet onto the front No. 1 speaker assembly.

      • Do not leave any space between the rivet head and front No. 1 speaker assembly.

      • A004EO3E01

        Do not leave any space between the front No. 1 speaker assembly and door. Firmly hold the 2 items together while installing the rivet.

        Text in Illustration
        *a Riveter
        *b Incorrect
        *c Correct

    3. Connect the connector.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  3. INSTALL FRONT ARMREST BASE UPPER PANEL

    Click here