WASHER MOTOR (for Front Side) REMOVAL


  1. PRECAUTION (w/ Air Suspension)

    Note

    Be sure to read Precaution thoroughly before servicing Click here.

  2. REMOVE FRONT WHEEL RH

  3. REMOVE FRONT FENDER LINER RH


    1. A01NGH6E01

      Using a screwdriver, turn the pin 90 degrees and remove the 2 pin hold clips.

    2. A01NHGU

      Using a 4 mm hexagon wrench, remove the 4 hexagon screws.

    3. A01NGWQE01
      Text in Illustration
      *1 Grommet

      Remove the 7 clips and 6 screws.

    4. Remove the 3 grommets and front fender liner RH.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

  4. DRAIN WASHER FLUID


    1. A01ND0E

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  5. REMOVE FRONT WASHER MOTOR AND PUMP ASSEMBLY


    1. A01NDKT

      Disconnect the connector.

    2. Remove the windshield washer motor and pump assembly.

      Tech Tips

      Use a container to collect the washer fluid.