REAR SEAT ENTERTAINMENT ECU INSTALLATION


  1. INSTALL MULTI-DISPLAY CONTROLLER ASSEMBLY

  2. INSTALL NO. 3 MULTI-DISPLAY CONTROLLER BRACKET


    1. A01NEBH

      Install the No. 3 multi-display controller bracket with the 2 bolts.

  3. INSTALL NO. 2 MULTI-DISPLAY CONTROLLER BRACKET


    1. A01NGO4

      Install the No. 2 multi-display controller bracket with the 2 bolts.

  4. INSTALL MULTI-DISPLAY CONTROLLER ASSEMBLY WITH BRACKET


    1. A01NH9E

      Install the multi-display controller assembly with bracket with the 3 nuts.

  5. INSTALL REAR SEAT ENTERTAINMENT ECU ASSEMBLY


    1. w/o G-BOOK System:


      1. A01NEX6

        Engage the guide.

      2. Install the rear seat entertainment ECU assembly with the 3 bolts.

      3. Connect the 3 connectors.

    2. w/ G-BOOK System:


      1. A01NGEA

        Engage the guide.

      2. Install the rear seat entertainment ECU assembly with the 3 bolts.

      3. Connect the 7 connectors.

    3. A01NFCG

      Engage the claw and 3 clamps to install the floor carpet to the original position.

    4. A01NE1F

      Engage the claw and 3 clamps to install the floor carpet to the original position.

  6. INSTALL CONSOLE BOX (for RHD)


    1. A01NDV8E01
      Text in Illustration
      *1 Clamp
      *2 Guide

      Engage the 3 guides as shown in the illustration.

    2. Engage the 2 clamps.

    3. Install the 2 clips.

    4. A01NCM1

      Install the console box with the 5 screws <D>.

  7. INSTALL CONSOLE BOX (for LHD)


    1. A01NF55E01
      Text in Illustration
      *1 Clamp
      *2 Guide

      Engage the 3 guides as shown in the illustration.

    2. Engage the 2 clamps.

    3. Install the 3 clips.

    4. A01NDJA

      Install the console box with the 5 screws <D>.

  8. INSTALL FRONT CONSOLE BOX COVER


    1. A01NHOI

      Connect the connector.

    2. Engage the 5 guides and 2 clips, and install the front console box cover.

  9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL


    1. A01NF11

      Engage the 7 clips to install the lower instrument panel finish panel as shown in the illustration.

  10. INSTALL INSTRUMENT PANEL FINISH PANEL


    1. A01ND4S

      Engage the 2 guides, claw and 2 clips to install the instrument panel finish panel as shown in the illustration.

  11. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. A01NG78

      Engage the 8 clips and 2 guides.

    3. Install the lower instrument panel finish panel sub-assembly with the 2 screws <D>.

    4. A01NE1K

      Engage the 2 claws to close the cover as shown in the illustration.

  12. INSTALL NO. 1 SWITCH HOLE BASE


    1. Connect each connector.

    2. A01NFF7

      Engage the 4 claws and 2 guides to install the No. 1 switch hole base.

  13. INSTALL INSTRUMENT PANEL GARNISH LH


    1. A01NH3A

      Engage the 6 clips to install the instrument panel garnish LH.

  14. INSTALL REAR CONSOLE BOX ASSEMBLY


    1. A01ND4Q

      Engage the 8 guides as shown in the illustration.

    2. A01NEDEE01
      Text in Illustration
      *1 Screw
      *2 Bolt

      Install the rear console box assembly with the 2 screws and 4 bolts.

    3. Connect each connector.

  15. INSTALL MULTI-MEDIA INTERFACE ECU ASSEMBLY


    1. Connect the connector.

    2. A01NG12

      Engage the clip and guide.

    3. Install the multi-media interface ECU assembly with the 2 bolts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

  16. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY


    1. A01NGOF

      w/o Rear Seat Entertainment System:


      1. Engage the 4 claws and 6 clips to install the console rear end panel sub-assembly.

    2. w/ Rear Seat Entertainment System:


      1. Connect each connector.

      2. Engage the 4 claws and 6 clips to install the console rear end panel sub-assembly.

  17. INSTALL NO. 2 CONSOLE BOX DUCT


    1. A01NH7K

      Install the No. 2 console box duct with the 2 screws.

  18. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Engage the clamp.

    2. Connect each connector.

    3. A01NEE4

      Engage the 3 claws and 3 clips.

    4. w/o Seat Heater System:


      1. Connect the connector to the console box hole cover.

    5. A01NDQX

      w/ Seat Heater System:


      1. Connect the connector.

      2. Engage the 4 claws to install the seat heater switch assembly.

    6. A01NHPA

      Engage the 4 claws and 4 clips to install the upper console panel sub-assembly.

  19. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01NH7J

      Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.

  20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  21. INSTALL REAR DECK FLOOR BOX


    1. A01NDSY

      Install the rear deck floor box with the 3 clips.

  22. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)


    1. Inspect the suspension control system Click here.

  23. INSPECT SRS WARNING LIGHT


    1. Inspect the SRS warning light Click here.