CAUTION:
Be sure to read Precaution thoroughly before servicing Click here.
Note
Before removal, make sure to disable vehicle height control by pressing the height control OFF switch and confirming that the height control OFF indication is displayed on the meter.
PRECAUTION (w/ Navigation System for HDD)
Note
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.
| Specification | Waiting Time |
|---|---|
| w/o Telematics transceiver | 60 sec. |
| w/ Telematics transceiver | 120 sec. |
REMOVE REAR DECK FLOOR BOX
Remove the 3 clips and the rear deck floor box.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE FRONT FLOOR COVER RH
REMOVE ENGINE SERVICE COVER STAY
Remove the 3 bolts and engine service cover stay from the body.
REMOVE PNEUMATIC TANK WITH TUBE ASSEMBLY
Disconnect the connector.
Using SST, disconnect the height control tube from the pneumatic tank with tube assembly.
Tech Tips
For the disconnecting procedure of the tube (type 2), refer to Precaution of the suspension control system Click here.
Separate the height control tube from the clamp.
Remove the 2 bolts and pneumatic tank with tube assembly.
REMOVE NO. 1 HEIGHT CONTROL TUBE
Remove the 2 holders and No. 1 height control tube.
Tech Tips
For the removing procedure of the tube (type 3), refer to Precaution of the suspension control system Click here.