HEIGHT CONTROL COMPRESSOR REMOVAL

CAUTION:

Be sure to read Precaution thoroughly before servicing Click here.

Note

Before removal, make sure to disable vehicle height control by pressing the height control OFF switch and confirming that the height control OFF indication is displayed on the meter.


  1. PRECAUTION (w/ Navigation System for HDD)

    Note

    After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

    Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal
    Specification Waiting Time
    w/o Telematics transceiver 60 sec.
    w/ Telematics transceiver 120 sec.

  2. REMOVE REAR DECK FLOOR BOX


    1. A01NDSY

      Remove the 3 clips and the rear deck floor box.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR


    1. A01NEJ9

      Remove the 2 bolts and 2 screws.

    2. Remove the 2 clips and No. 1 luggage compartment side cover protector.

  5. REMOVE CAP GROMMET


    1. Disconnect the clamp and hose from the cap grommet.

    2. A01NET4

      Remove the cap grommet from the No. 1 rear bumper reinforcement.

  6. REMOVE HEIGHT CONTROL COMPRESSOR WITH BRACKET


    1. A01NDOK

      Remove the holder and disconnect the air tube from the height control way.

      Tech Tips

      For the disconnecting procedure of the tube (type 3), refer to Precaution of the suspension control system Click here.

    2. A01NG1R

      Disconnect the 2 connectors.

    3. A01NFBQ

      Disengage the wire harness clamp from the bracket.

    4. A01NEZR

      Remove the 4 bolts and height control compressor with bracket.

  7. REMOVE HEIGHT CONTROL COMPRESSOR BRACKET


    1. A01NF3J

      Disengage the wire harness clamp.

    2. Remove the 2 bolts, nut and height control compressor bracket from the body.

  8. REMOVE HEIGHT CONTROL FILTER


    1. A01NEZY

      Separate the 2 clips and 2 height control hoses.

    2. Remove the 2 bolts and height control filter.

  9. REMOVE NO. 1 HEIGHT CONTROL HOSE


    1. A01ND7O

      Remove the clip and No. 1 height control hose.

  10. REMOVE NO. 2 HEIGHT CONTROL TUBE


    1. A01NEWV

      Remove the holder.

      Tech Tips

      For the disconnecting procedure of the tube (type 3), refer to Precaution of the suspension control system Click here.

    2. Separate the 3 clamps and disconnect the No. 2 height control tube from the height control compressor assembly.

  11. REMOVE HEIGHT CONTROL VALVE HARNESS ASSEMBLY


    1. A01NHNK

      Disconnect the connector and disengage the 3 clamps from the bracket.

    2. Detach the connector's claw and height control valve harness assembly.

  12. REMOVE HEIGHT CONTROL COMPRESSOR ASSEMBLY


    1. A01ND0C

      Remove the 3 bolts, 3 bushings and bracket from the compressor.