FRONT CRANKSHAFT OIL SEAL REMOVAL


  1. PRECAUTION (w/ Air Suspension)

    Note

    Be sure to read Precaution thoroughly before servicing Click here.

  2. REMOVE FRONT WHEEL RH

  3. REMOVE FRONT FENDER LINER RH

  4. REMOVE FRONT FENDER APRON SEAL RH

  5. REMOVE V-RIBBED BELT


    1. A01NDRY

      Release the V-ribbed belt tension by turning the V-ribbed belt tensioner counterclockwise, and remove the V-ribbed belt from the V-ribbed belt tensioner.

    2. While turning the V-ribbed belt tensioner counterclockwise, align with its holes, and then insert a 5 mm bi-hexagon wrench into the holes to secure the V-ribbed belt tensioner.

  6. REMOVE CRANKSHAFT PULLEY


    1. A01NCUIE02
      Text in Illustration
      *1 Hold
      *2 Turn

      Using SST, loosen the crankshaft pulley bolt.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A01NCXBE03
      Text in Illustration
      *1 Hold
      *2 Turn

      Using SST, remove the crankshaft pulley bolt and crankshaft pulley.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05021 )

  7. REMOVE CRANKSHAFT TIMING GEAR KEY


    1. A01NCS3

      Remove the pulley set key from the crankshaft.

  8. REMOVE TIMING CHAIN CASE OIL SEAL


    1. A01NE3ZE03
      Text in Illustration
      *1 Protective Tape
      *2 Cut Position

      Using a knife, cut off the timing chain case oil seal lip.

    2. Using a screwdriver, pry out the timing chain case oil seal.

      Note

      After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.