PARKING BRAKE CABLE REMOVAL


  1. PRECAUTION (w/ Navigation System for HDD)

    Note

    After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

    Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal
    Specification Waiting Time
    w/o Telematics transceiver 60 sec.
    w/ Telematics transceiver 120 sec.

  2. PRECAUTION (w/ Air Suspension)

    Note

    Be sure to read Precaution thoroughly before servicing Click here.

  3. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY (for LHD)

    Tech Tips

    Refer to the instructions for Removal of the parking brake control pedal assembly Click here.

  4. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY (for RHD)

    Tech Tips

    Refer to the instructions for Removal of the parking brake control pedal assembly Click here.

  5. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)


    1. A01NFTW

      Remove the adjusting nut.

    2. A01NEDY

      Remove the clip.

    3. A01NEUX

      Pull up the parking brake pedal claw and remove the No. 1 parking brake cable assembly.

  6. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)


    1. A01NDW9

      Remove the adjusting nut.

    2. A01NEXJ

      Remove the clip.

    3. A01NHIK

      Pull up the parking brake pedal claw and remove the No. 1 parking brake cable assembly.

  7. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER

    Tech Tips

    Refer to the procedures up to "Remove No. 2 Parking Brake Shoe Assembly with Parking Brake Shoe Lever" Click here.

  8. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A01NCT0

      Remove the 2 bolts and separate the No. 3 parking brake cable assembly from the backing plate.

    2. Remove the 4 bolts, nut and No. 3 parking brake cable assembly.

      A01NEU2

    3. Remove the No. 1 parking brake cable support bracket, No. 2 parking brake cable support bracket and No. 2 cable support bracket from the No. 3 parking brake cable assembly.

      A01NG8CE01
      Text in Illustration
      *1 No. 1 Parking Brake Cable Support Bracket *2 No. 2 Parking Brake Cable Support Bracket
      *3 No. 2 Cable Support Bracket - -

  9. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY


    1. A01NEVM

      Remove the 2 bolts and separate the No. 2 parking brake cable assembly from the backing plate.

    2. Remove the 5 bolts and No. 2 parking brake cable assembly.

      A01NFM3

    3. Remove the parking brake cable support bracket, cable support bracket and No. 2 cable support bracket from the No. 2 parking brake cable assembly.

      A01NG7LE01
      Text in Illustration
      *1 Parking Brake Cable Support Bracket *2 Cable Support Bracket
      *3 No. 2 Cable Support Bracket - -