REAR BRAKE FLEXIBLE HOSE REMOVAL

Note

If both the left and right hoses are disconnected at the same time, be sure to place identification marks indicating the position on each side.

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.


  1. PRECAUTION (w/ Air Suspension)

    Note

    Be sure to read Precaution thoroughly before servicing Click here.

  2. DISCONNECT BRAKE BOOSTER PUMP CONNECTOR


    1. A01NDJP

      With the power switch off, disconnect the 2 brake booster pump connectors.

  3. REMOVE REAR WHEEL

  4. DRAIN BRAKE FLUID

    Note

    If brake fluid leaks onto any painted surface, immediately wash it off.

  5. REMOVE REAR FLEXIBLE HOSE


    1. A01NDH6

      Remove the union bolt and gasket, and separate the rear flexible hose.

    2. A01NDS3

      Remove the 2 bolts and separate the rear flexible hose from the flexible hose bracket.

    3. A01NG3I

      Using a union nut wrench, disconnect the brake line from the rear flexible hose.

      Note


      • Do not bend or damage the brake line.

      • Do not allow any foreign matter such as dirt and dust to enter the brake line.

    4. Remove the clip and rear flexible hose.

  6. REMOVE FLEXIBLE HOSE BRACKET


    1. A01NEBW

      Remove the bolt and flexible hose bracket from the rear upper control arm assembly.