FRONT BRAKE FLEXIBLE HOSE REMOVAL

Note

If both the left and right hoses are disconnected at the same time, be sure to place identification marks indicating the position on each side.

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.


  1. PRECAUTION (w/ Air Suspension)

    Note

    Be sure to read Precaution thoroughly before servicing Click here.

  2. DISCONNECT BRAKE BOOSTER PUMP CONNECTOR


    1. A01NDJP

      With the power switch off, disconnect the 2 brake booster pump connectors.

  3. REMOVE FRONT WHEEL

  4. DRAIN BRAKE FLUID

    Note

    If brake fluid leaks onto any painted surface, immediately wash it off.

  5. REMOVE FRONT FLEXIBLE HOSE


    1. A01NHFK

      Remove the union bolt and gasket, and separate the front flexible hose.

    2. A01NH9C

      Using a union nut wrench, disconnect the brake line from the front flexible hose.

      Note


      • Do not bend or damage the brake line.

      • Do not allow any foreign matter such as dirt and dust to enter the brake lines.

    3. A01NFJR

      Remove the clip.

    4. A01NEOP

      Remove the bolt and front flexible hose from the absorber bracket.