HIGH INTENSITY DISCHARGE HEADLIGHT BULB REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE ENGINE ROOM SIDE COVER


    1. A003B3G

      Remove the clip and engine room side cover.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • w/ Navigation System for HDD:

      After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A003AXU

      Remove the 8 clips and radiator support opening cover.

  4. REMOVE NO. 1 HEADLIGHT BACK COVER


    1. A003C9N

      Turn the back cover in the direction indicated by the arrow and remove it.

  5. REMOVE DISCHARGE HEADLIGHT BULB


    1. A003AXY

      Turn the headlight control ECU socket in the direction indicated by the arrow and disconnect the headlight control ECU socket.

    2. A003C7G

      Release the set spring lock as shown in the illustration and remove the bulb.

      Note

      Do not touch the glass part of the bulb.