AIRBAG CUT-OFF SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL AIRBAG CUTOFF SWITCH CYLINDER SUB-ASSEMBLY


    1. A003BYU

      Attach the 2 claws to install the cutoff switch cylinder.

  2. INSTALL INSTRUMENT SIDE PANEL RH


    1. A00E9FJE01
      Text in Illustration
      *1 w/ Airbag Cut Off Switch Cylinder

      Attach the 2 hooks.

    2. w/ Airbag Cut Off Switch Cylinder:


      1. Connect the connector.

    3. A00E96K

      Attach the 3 clips and 4 claws to install the side panel.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL ENGINE ROOM SIDE COVER


    1. A003B3G

      Install the engine room side cover with the clip.

  5. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.