NAVIGATION ANTENNA REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER


    1. A003B3G

      Remove the clip and engine room side cover.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • w/ Navigation System (for HDD):

      After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY


    1. Remove the upper instrument panel Click here.

  4. REMOVE NAVIGATION ANTENNA ASSEMBLY (for LHD)


    1. A003AYP

      Detach the claw and clamp.

    2. Remove the 2 screws and antenna.

  5. REMOVE NAVIGATION ANTENNA ASSEMBLY (for RHD)


    1. A003CRT

      Detach the claw and clamp.

    2. Remove the 2 screws and antenna.