NAVIGATION ECU INSTALLATION


  1. INSTALL EXTENSION MODULE


    1. Connect the connector and attach the clamp.

    2. A00OUQ9

      Align the positioning boss of the extension module with the hole in the radio and display receiver assembly, and then place the extension module on the radio and display receiver assembly.

    3. Connect the connector.

    4. Connect the 5 connectors and install the navigation wire.

  2. INSTALL NO. 2 RADIO RECEIVER BRACKET


    1. Install the No. 2 radio receiver bracket with the 5 screws.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }
  3. INSTALL NO. 1 RADIO RECEIVER BRACKET


    1. Install the No. 1 radio receiver bracket with the 5 screws.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }
  4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.