INSTALL EXTENSION MODULE
Connect the connector and attach the clamp.
Align the positioning boss of the extension module with the hole in the radio and display receiver assembly, and then place the extension module on the radio and display receiver assembly.
Connect the connector.
Connect the 5 connectors and install the navigation wire.
INSTALL NO. 2 RADIO RECEIVER BRACKET
Install the No. 2 radio receiver bracket with the 5 screws.
INSTALL NO. 1 RADIO RECEIVER BRACKET
Install the No. 1 radio receiver bracket with the 5 screws.
INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.