NAVIGATION SYSTEM (for HDD) Voice is not Recognized

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK NAVIGATION SETTING


    1. A003BQ8E01

      Enter the "Setup" screen by pressing the "SETUP" switch.

    2. Select "Voice".

    3. A003BCEE03

      Check that "Voice Recognition Guidance" is not off.

      OK
      Voice Recognition Guidance is not off.

    NG

    TURN "Voice Recognition Guidance" ON

    OK

  2. CHECK MICROPHONE


    1. A003BGOE01
      Text in Illustration
      *1 Microphone Input Level Meter
      *2 Recording Switch
      *3 Stop Switch
      *4 Play Switch
      *5 Recording Indicator

      Enter the "Microphone&Voice Recognition Check" mode Click here.

    2. When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.

    3. Push the recording switch and perform voice recording.

      Tech Tips

      Voice can be recorded for up to 5 seconds.

    4. Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

      OK
      All check results are normal.

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    REPLACE NAVIGATION RECEIVER ASSEMBLY Click here