AMPLIFIER ANTENNA (for Wagon) REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER


    1. A003B3G

      Remove the clip and engine room side cover.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • w/ Navigation System (for HDD):

      After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE ROOF HEADLINING ASSEMBLY


    1. Remove the roof headlining Click here.

  4. REMOVE AMPLIFIER ANTENNA ASSEMBLY


    1. Detach the 4 clamps.

    2. Remove the nut.

      A005WB4
    3. A005S8P

      Detach the 2 claws and remove the amplifier antenna.