RADIO RECEIVER INSTALLATION


  1. INSTALL NO. 2 RADIO BRACKET


    1. A003B8Z

      Install the bracket with the 3 screws.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  2. INSTALL NO. 1 RADIO BRACKET


    1. A003BCX

      Install the bracket with the 3 screws.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  3. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. A003BXV

      Insert the radio receiver to attach the 4 clips on its backside.

      Note

      When inserting the radio receiver, do not press the knobs on it.

    3. A003DP4

      Install the radio receiver with the 4 screws.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  4. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY WITH FINISH PANEL


    1. A00EA2S

      Connect the connector and clamp.

    2. A00E9CF

      Attach the 2 clips and hook.

    3. A00E8VP

      Attach the 6 clips.

    4. Attach the 3 claws and 3 hooks to install the panel register.

  5. INSTALL NO. 3 BOX PANEL (w/ Console Box Lid)


    1. When replacing the No. 3 box panel with a new one:


      1. A006V0HE01
        Text in Illustration
        *1 Cut

        Cut off the rib (the piece used to maintain the shape of the panel) shown in the illustration.

    2. Attach the 6 clips to install the box panel.

      A006X7WE02

  6. INSTALL NO. 3 BOX PANEL (w/o Console Box Lid)


    1. When replacing the No. 3 box panel with a new one:


      1. A003DNZE01
        Text in Illustration
        *1 Cut

        Cut off the rib (the piece used to maintain the shape of the panel) shown in the illustration.

    2. A003AMQ

      Attach the 6 clips to install the box panel.

  7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for LHD)


    1. A00E70T

      Attach the 4 clips and 5 claws to install the panel end.

  8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for RHD)


    1. w/o TOYOTA Parking Assist-sensor System:


      1. Attach the 4 clips and 5 claws to install the panel end.

    2. w/ TOYOTA Parking Assist-sensor System:


      1. Connect the connector.

      2. Attach the 4 clips and 5 claws to install the panel end.

        A00E8WSE01

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the 4 clips and 5 claws to install the panel end.

      A00E7Y2E01

  10. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A00EANQE01
      Text in Illustration
      *1 Guide
      *2 Clamp

      Attach the guide near the front of the vehicle.

    2. Attach the clamp.

    3. Attach the 2 clips and 5 claws to install the finish panel.

  11. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


    1. A00E9NPE01
      Text in Illustration
      *1 Guide
      *2 Clamp

      Attach the guide near the front of the vehicle.

    2. Attach the clamp.

    3. Attach the 2 clips and 5 claws to install the finish panel.

  12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  13. INSTALL ENGINE ROOM SIDE COVER


    1. A003B3G

      Install the engine room side cover with the clip.