ROOF SUNSHADE REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • w/ Navigation System (for HDD):

      After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT ROOF SIDE GARNISH LH


    1. Remove the front roof side garnish LH Click here.

  3. REMOVE FRONT ROOF SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. REMOVE UPPER ROOF RACK FRAME


    1. A003EH0

      Remove the 8 nuts and 4 upper roof rack frames.

  5. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH


    1. Remove the curtain shield airbag assembly LH Click here.

  6. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. REMOVE SLIDING ROOF HOUSING SUB-ASSEMBLY


    1. A003ASL

      Detach the connector wire clamp.

    2. Remove the 14 nuts and 2 bolts.

      A003BQ2

  8. REMOVE NO. 1 ROOF WINDOW GLASS SUB-ASSEMBLY


    1. Remove the 14 nuts and No. 1 roof window glass.

      A003D02