ROOF HEADLINING (for Wagon) INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL TONNEAU COVER HOLDER BRACKET LH (w/ Tonneau Cover)

    A00E6KU

    1. Install the tonneau cover holder bracket with the 2 bolts.

  2. INSTALL TONNEAU COVER HOLDER BRACKET RH (w/ Tonneau Cover)

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL NO. 2 DECK BOARD BRACKET

    A00EB1V

    1. Install the No. 2 deck board bracket with the 2 bolts.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  4. INSTALL NO. 1 DECK BOARD BRACKET

    Tech Tips

    Use the same procedure described for the No. 2 deck board bracket.

  5. INSTALL NO. 4 LUGGAGE COMPARTMENT TRIM BRACKET (w/o Deck Rail)

    A00E72O

    1. Install the No. 4 luggage compartment trim bracket with the bolt.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }

  6. INSTALL NO. 3 LUGGAGE COMPARTMENT TRIM BRACKET (w/o Deck Rail)

    Tech Tips

    Use the same procedure described for the No. 4 luggage compartment trim bracket.

  7. INSTALL FRONT DECK RAIL BRACKET LH (w/ Deck Rail)

    A00E7T0E01

    1. Install the front deck rail bracket with the 2 bolts.

      Torque:
      for bolt A
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }
      for bolt B
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  8. INSTALL FRONT DECK RAIL BRACKET RH (w/ Deck Rail)

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL REAR NO. 3 SIDE RAIL SPACER LH

    A00E9U6

    1. Attach the 2 claws to install the No. 3 side rail spacer.

  10. INSTALL REAR NO. 3 SIDE RAIL SPACER RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. INSTALL REAR NO. 2 SIDE RAIL SPACER LH

    A00E9RQ

    1. Attach the 2 claws to install the No. 2 side rail spacer.

  12. INSTALL REAR NO. 2 SIDE RAIL SPACER RH

    Tech Tips

    Use the same procedure described for the LH side.

  13. INSTALL FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH

    A00EB79

    1. Attach the 5 claws to install the front shoulder belt anchor plate.

  14. INSTALL FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  15. INSTALL REAR DOOR SCUFF PLATE OUTSIDE LH

    A00EB6T

    1. Attach the 2 clips to install the rear door scuff plate outside.

  16. INSTALL REAR DOOR SCUFF PLATE OUTSIDE RH

    Tech Tips

    Use the same procedure described for the LH side.

  17. INSTALL FRONT DOOR SCUFF PLATE OUTSIDE LH

    A00E85X

    1. Attach the 3 clips to install the front door scuff plate outside.

  18. INSTALL FRONT DOOR SCUFF PLATE OUTSIDE RH

    Tech Tips

    Use the same procedure described for the LH side.

  19. INSTALL ROOF HEADLINING ASSEMBLY

    A00EAZV

    Tech Tips

    Before installing the roof headlining, move the front seats and rear seat to the positions shown in the illustration.


    1. A00E6TF

      Place the roof headlining into the vehicle through the back door.

      Note

      Be careful not to damage the roof headlining when placing it in the cabin.

    2. w/o Roof Sunshade System:


      1. Install the roof headlining with the 5 clips.

        A00E7ED

    3. w/ Roof Sunshade System:


      1. Attach the 3 guides and 12 fasteners to install the roof headlining.

      2. Install the 5 clips.

        A00E7CDE01
        Text in Illustration
        *1 Guide *2 Fastener

    4. for LHD:


      1. A00EA3YE01

        Connect the 2 roof wire connectors.

      2. A00E9R7E01

        Connect the 2 clamps.

    5. for RHD:


      1. A00E8CUE01

        Connect the roof wire connector.

      2. A00E9PYE01

        Connect the 2 clamps and connector.

    6. A00E6UI

      Connect the 4 clamps to the front pillar LH.

    7. A00E753

      w/ Roof Sunshade System:

      Connect the connector.

    8. A00EAGM

      Install the antenna with the 2 bolts.

    9. Connect the 3 clamps to the rear pillar RH.

    10. Connect the 3 connectors.

    11. A00E7QS

      Connect the 3 clamps to the front pillar RH.

    12. Connect the connector.

    13. A00E6PI

      w/ Lane Keeping Assist System:

      Tech Tips


      • Use the same procedure for RHD and LHD vehicles.

      • The procedure listed below is for LHD vehicles.


      1. Connect the connector and attach the clamp.

    14. A00EAPB

      w/ Rain Sensor:

      Connect the rain sensor connector.

    15. A00E78Z

      w/ EC Mirror:

      Connect the EC mirror connector.

  20. INSTALL REAR ROOM PARTITION NET HOOK LH

    A00E722

    1. Attach the 2 claws to install the rear room partition net hook.

    2. Install the screw.

  21. INSTALL REAR ROOM PARTITION NET HOOK RH

    Tech Tips

    Use the same procedure described for the LH side.

  22. INSTALL ASSIST GRIP SUB-ASSEMBLY

    A00E801

    Tech Tips

    Use the same procedure for the other assist grip.


    1. Assemble the assist grip as shown in the illustration.

    2. A00E79P

      Install the assist grip.

  23. INSTALL REAR ASSIST GRIP ASSEMBLY LH

    A00EAWM

    1. Assemble the rear assist grip as shown in the illustration.

    2. A00E8GB

      Install the rear assist grip.

  24. INSTALL REAR ASSIST GRIP ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  25. INSTALL VISOR HOLDER

    A00E8N0

    Tech Tips

    Use the same procedure to install the visor holder on the other side.


    1. Attach the 2 claws.

    2. Push in the visor holder as shown in the illustration.

  26. INSTALL VISOR ASSEMBLY LH

    A00EAS8

    1. Attach the 2 clips to install the visor.

  27. INSTALL VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  28. INSTALL RAIN SENSOR COVER (w/ Rain Sensor)


    1. A006V8F

      Attach the 3 claws to install the No. 1 rain sensor cover.

  29. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)


    1. w/o Rear Monitor:

      Install the inner rear view mirror stay holder cover Click here.

    2. w/ Rear Monitor:

      Install the inner rear view mirror stay holder cover Click here.

  30. INSTALL NO. 1 ROOM LIGHT COVER (for Cold Area)

    A00E9SA

    1. Install the No. 1 room light cover.

  31. INSTALL NO. 1 ROOM LIGHT ASSEMBLY

    A00EALI

    1. Connect the connector.

    2. Attach the 4 clips to install the No. 1 room light.

  32. INSTALL FRONT ROOF TOP GARNISH (w/ Lane Keeping Assist System)


    1. Attach the 2 claws and clip to install the front roof top garnish.

      A00EAPCE01

      Note

      When removing the rain sensor cover, do not apply force to the lane recognition camera sensor assembly areas labeled "X".

  33. INSTALL MAP LIGHT ASSEMBLY

    A00EB9Q

    1. Connect the connector.

    2. Attach the 4 clips to install the map light.

  34. INSTALL COIN BOX ASSEMBLY


    1. A006ULI

      Attach the 2 hinges to install the coin box.

    2. A006W5T

      While pushing in the sides of the coin box as indicated by the arrows in the illustration, close the coin box to engage the 2 stoppers.

  35. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Tech Tips


    • Use the same procedure for RHD and LHD vehicles.

    • The procedure listed below is for LHD vehicles.


    1. Install the upper instrument panel sub-assembly Click here.

  36. INSTALL INNER ROOF SIDE GARNISH LH

    A00EAI7E01
    Text in Illustration
    *1 Clip A

    1. Install a new clip A to the inner roof side garnish.

    2. Attach the 7 clips to install the inner roof side garnish.

  37. INSTALL INNER ROOF SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  38. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Pass the fuel lid opener cable through the deck trim side panel.

    2. Connect the connector.

    3. Attach the 7 clips and 3 claws to install the deck trim side panel.

    4. Install the bolt and clip.

      A00EAYWE01
      Text in Illustration
      *1 Fuel Lid Opener Cable - -

  39. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH


    1. Attach the 7 clips and 3 claws to install the deck trim side panel.

    2. Install the bolt and clip.

      A00EB2T

  40. INSTALL INNER ROOF SIDE GARNISH CAP LH

    A00E91Y

    1. Attach the 2 claws to install the inner roof side garnish cap.

  41. INSTALL INNER ROOF SIDE GARNISH CAP RH

    Tech Tips

    Use the same procedure described for the LH side.

  42. INSTALL NO. 2 DECK SIDE TRIM HOOK

    A00E8YJ

    Tech Tips

    Use the same procedure to install the No. 2 deck side trim hook on the other side.


    1. Install the No. 2 deck side trim hook with the screw.

  43. INSTALL CENTER PILLAR GARNISH LH

    A00EAN3

    1. Pass the front seat outer belt floor anchor through the center pillar garnish.

    2. Attach the clip to install the center pillar garnish.

    3. Install the 2 screws.

    4. A00E9F7

      Install the front seat outer belt floor anchor with the bolt.

      Torque:
      41 N*m  { 418 kgf*cm, 30 ft.*lbf }

  44. INSTALL CENTER PILLAR GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  45. INSTALL LAP BELT OUTER ANCHOR COVER

    A00EBEO

    Tech Tips

    Use the same procedure for the other lap belt outer anchor cover.


    1. Attach the 3 claws to install the lap belt outer anchor cover.

  46. INSTALL LOWER CENTER PILLAR GARNISH LH

    A00E8QB

    1. Attach the 2 claws and 3 clips to install the lower center pillar garnish.

  47. INSTALL LOWER CENTER PILLAR GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  48. INSTALL FRONT PILLAR GARNISH LH

    A00E7THE01
    Text in Illustration
    *1 Front Pillar Garnish Clip
    *2 Protective Tape

    1. Remove the protective cover.

    2. Attach the 2 guides.

    3. Turn the end of the front pillar garnish clip 90° with needle-nosed pliers and install it to the front pillar garnish.

      Tech Tips

      Tape the needle-nosed pliers tip before use.

    4. A00EATFE01
      Text in Illustration
      *1 Front Pillar Garnish Clip

      Attach the 2 clips to install the front pillar garnish.

  49. INSTALL FRONT PILLAR GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  50. INSTALL BACK DOOR WEATHERSTRIP

    A00EAEP

    1. Align the center mark of the back door weatherstrip with the position indicated by the arrow in the illustration and install the back door weatherstrip.

  51. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    A00E9LDE01
    Text in Illustration
    *1 Paint Mark
    *2 Mark Position

    1. Install the rear door opening trim weatherstrip as shown in the illustration.

  52. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  53. INSTALL REAR DOOR SCUFF PLATE LH

    A00EBB8

    1. Attach the clip and 6 claws to install the front door scuff plate.

  54. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  55. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    A00E7D9E01
    Text in Illustration
    *1 Paint Mark
    *2 Mark Position

    1. Install the front door opening trim weatherstrip as shown in the illustration.

  56. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  57. INSTALL COWL SIDE TRIM BOARD LH

    A00E7SS

    1. Attach the clip, claw and guide to install the cowl side trim board.

  58. INSTALL COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure described for the LH side.

  59. INSTALL FRONT DOOR SCUFF PLATE LH

    A00EA17

    1. Attach the 2 clips and 8 claws to install the front door scuff plate.

  60. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  61. INSTALL FRONT DECK FLOOR BOX

    A00E6UE

    1. Attach the 4 guides to install the front deck floor box.

    2. Install the 2 clips.

  62. INSTALL REAR FLOOR FINISH PLATE

    A00E6JD

    1. Attach the 4 clips to install the rear floor finish plate.

  63. INSTALL DECK FLOOR BOX LH

    A00EA58

    1. Attach the 5 guides to install the deck floor box.

  64. INSTALL DECK FLOOR BOX RH

    Tech Tips

    Use the same procedure described for the LH side.

  65. INSTALL ROPE HOOK ASSEMBLY (w/o Deck Rail)

    A00E9GF

    Tech Tips

    Use the same procedure for all the rope hooks.


    1. Install the rope hook with the bolt.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  66. INSTALL NO. 6 DECK SIDE TRIM COVER (w/o Deck Rail)

    A00EAH0

    1. Attach the 3 claws to install the No. 6 deck side trim cover.

  67. INSTALL NO. 5 DECK SIDE TRIM COVER (w/o Deck Rail)

    Tech Tips

    Use the same procedure described for the No. 6 deck side trim cover.

  68. INSTALL NO. 2 DECK SIDE TRIM COVER (w/o Deck Rail)

    A00E8MU

    1. Attach the 2 clips and 3 guides to install the No. 2 deck side trim cover.

  69. INSTALL NO. 1 DECK SIDE TRIM COVER (w/o Deck Rail)

    Tech Tips

    Use the same procedure described for the No. 2 deck side trim cover.

  70. INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail)

    A00E6UC

    1. Install the floor side rail with the 3 bolts.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  71. INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail)

    Tech Tips

    Use the same procedure described for the LH side.

  72. INSTALL REAR DECK FLOOR BOX


    1. Attach the 7 guides to install the rear deck floor box.

      A00EANXE01
    2. A00E6OR

      Install the bolt.

    3. A00E9R9

      Install the bolt.

  73. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY


    1. Attach the clip to install the No. 3 deck board.

      A00EAE7E01

  74. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY

    Tech Tips

    Use the same procedure described for the No. 3 deck board.

  75. INSTALL DECK BOARD SUB-ASSEMBLY

    A00E7OL

    1. Pull the lever to install the deck board.

  76. INSTALL DECK BOARD ASSEMBLY

    A00E8VK

    1. Attach the clip and 2 guides to install the deck board.

  77. INSTALL LOWER DECK TRIM SIDE BOARD LH (w/ Partition Board)


    1. Install the lower deck trim side board.

  78. INSTALL LOWER DECK TRIM SIDE BOARD RH (w/ Partition Board)


    1. Install the lower deck trim side board.

  79. INSTALL ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

    A00E9N0

    1. Install the room partition net.

  80. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    A00EB62

    1. Pull the lever to install the tonneau cover.

  81. INSTALL REAR SIDE SEATBACK ASSEMBLY LH


    1. A003C8D

      Install the claw as shown in the illustration.

    2. Install the side seatback with the bolt.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }
    3. A003CVNE01
      Text in Illustration
      *1 Protruding Part

      Install the rear seat 3 point type belt anchor with the bolt.

      Torque:
      41 N*m  { 418 kgf*cm, 30 ft.*lbf }

      Note

      Do not allow the anchor part of the rear seat 3 point type belt to overlap the protruding parts of the floor panel.

    4. Install the seat belt to the belt guide.

    5. Attach the claw to close the cap of the rear seat shoulder belt guide.

    6. Check if the ELR locks.

      Note

      The check should be performed with the outer belt assembly installed.


      1. With the belt assembly installed, check that the belt locks when it is pulled out quickly.

  82. INSTALL REAR SIDE SEATBACK ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  83. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    A003CGQ

    1. Attach the 2 rear hooks of the seat cushion to the seatback.

    2. Attach the 2 front hooks to install the seat cushion.

    3. Confirm that the seat cushion is firmly installed.

      Note

      When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.

  84. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  85. INSTALL ENGINE ROOM SIDE COVER


    1. A003B3G

      Install the engine room side cover with the clip.