ENGINE OIL COOLER INSTALLATION

PROCEDURE

1. INSTALL OIL COOLER ASSEMBLY

   
   

   1. Install 2 new gaskets to the oil filter bracket sub-assembly.

   2. Install the oil cooler assembly with the 2 bolts and 2 nuts.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

2. CONNECT WATER BY-PASS HOSE

   
   

   1. Connect the 2 water by-pass hoses.

3. ADD ENGINE OIL

   Click here

4. ADD ENGINE COOLANT

   Click here

5. INSPECT ENGINE OIL LEVEL

   Click here

6. INSPECT FOR ENGINE OIL LEAK

   Click here

7. INSPECT FOR COOLANT LEAK

   Click here

8. INSTALL INLET NO. 1 AIR CLEANER

   Click here

9. INSTALL COOL AIR INTAKE DUCT SEAL

   Click here

10. INSTALL ENGINE ROOM SIDE COVER

    Click here

11. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

12. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here