OIL LEVEL SENSOR INSTALLATION

PROCEDURE


  1. INSTALL OIL LEVEL SENSOR BRACKET


    1. Install the oil level sensor bracket.

  2. INSTALL ENGINE OIL LEVEL SENSOR


    1. Install the engine oil level sensor with the 2 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    2. Engage the clamp.

    3. Remove any foreign material from the connector mounting hole in the oil pan.

    4. Apply a small amount of engine oil to the O-ring, and then insert the connector into the hole.

    5. B007452

      Install a new clip to the engine oil level sensor as shown in the illustration.

      Note


      • If oil is present on the connector surface, wipe it clean with a piece of cloth or the like.

      • Do not spray brake cleaner on the connector surface or use cleaner solvent to clean the connector.

  3. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY

    Click here

  4. ADD ENGINE OIL

    Click here

  5. INSPECT FOR ENGINE OIL LEAK

    Click here

  6. INSPECT ENGINE OIL LEVEL

    Click here

  7. INSTALL FRONT SUSPENSION MEMBER BRACE

    Click here