COOLING FAN MOTOR REMOVAL

PROCEDURE


  1. REMOVE ENGINE ROOM SIDE COVER

    Click here

  2. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  3. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  4. REMOVE INLET NO. 1 AIR CLEANER

    Click here

  5. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  6. DRAIN ENGINE COOLANT

    Click here

  7. REMOVE RADIATOR RESERVE TANK ASSEMBLY

    Click here

  8. REMOVE NO. 1 RADIATOR HOSE

    Click here

  9. DISCONNECT ENGINE ROOM MAIN WIRE

    Click here

  10. REMOVE ENGINE ROOM ECU OUTLET DUCT

    Click here

  11. REMOVE FAN SHROUD ASSEMBLY


    1. B0076VO

      Disengage the 3 claws.

    2. Disengage the 3 guides and remove the fan shroud assembly from the radiator assembly.

      Note

      Do not damage the radiator assembly when removing the fan shroud assembly.

  12. REMOVE COOLING FAN ECU


    1. B0075KB

      Disconnect the cooling fan motor connector and No. 2 cooling fan motor connector.

    2. Disengage the 4 clamps.

    3. Remove the 2 screws and cooling fan ECU.

  13. REMOVE REMOVE NO. 2 FAN


    1. B0073VW

      Remove the nut and No. 2 fan.

  14. REMOVE FAN


    1. B0072QU

      Remove the nut and fan.

  15. REMOVE COOLING FAN MOTOR


    1. B0077QF

      Remove the 3 screws and cooling fan motor.

  16. REMOVE NO. 2 COOLING FAN MOTOR


    1. B00760YC01
      *A for 100 W Type
      *B for 200 W Type

      Remove the 3 screws and No. 2 cooling fan motor.