COOLING FAN MOTOR REMOVAL

PROCEDURE


  1. REMOVE ENGINE ROOM SIDE COVER

    Click here

  2. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  3. REMOVE INLET NO. 1 AIR CLEANER

    Click here

  4. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  5. REMOVE ENGINE ROOM ECU OUTLET DUCT

    Click here

  6. DISCONNECT ENGINE ROOM MAIN WIRE

    Click here

  7. DRAIN ENGINE COOLANT

    Click here

  8. REMOVE RADIATOR RESERVE TANK ASSEMBLY

    Click here

  9. REMOVE RADIATOR HOSE SUB-ASSEMBLY

    Click here

  10. DISCONNECT NO. 2 RADIATOR HOSE SUB-ASSEMBLY


    1. B0072V4

      Disconnect the No. 2 radiator hose sub-assembly from the radiator hose clamp.

    2. Remove the radiator hose clamp from the fan shroud assembly.

    3. Remove the bolt to disconnect the No. 2 radiator hose sub-assembly from the fan shroud assembly.

  11. REMOVE FAN SHROUD ASSEMBLY

    Click here

  12. REMOVE COOLING FAN WIRE


    1. for Cooling Fan Motor 240 W + 240 W Type:


      1. B00770I

        Disconnect the cooling fan wire connector.

      2. Disengage the 3 clamps to remove the cooling fan wire.

    2. for Cooling Fan Motor 300 W + 300 W Type:


      1. B0077T3C01
        *a Lock Lever

        Disengage the claw and raise the lock lever to disconnect the No. 2 cooling fan motor connector as shown in the illustration.

      2. Disengage the 2 clamps to remove the cooling fan wire.

  13. REMOVE FAN


    1. B0077U8

      for Cooling Fan Motor 240 W + 240 W Type:


      1. Remove the nut and fan.

    2. B0075SG

      for Cooling Fan Motor 300 W + 300 W Type:


      1. Remove the 3 screws and fan.

  14. REMOVE NO. 2 FAN


    1. for Cooling Fan Motor 240 W + 240 W Type:


      1. B0074JH

        Remove the nut and No. 2 fan.

    2. B007741

      for Cooling Fan Motor 300 W + 300 W Type:


      1. Remove the 3 screws and No. 2 fan.

  15. REMOVE COOLING FAN MOTOR


    1. for Cooling Fan Motor 240 W + 240 W Type:


      1. B0074SA

        Disconnect the cooling fan motor connector.

      2. Disengage the clamp.

      3. B00763N

        Remove the 3 screws and cooling fan motor.

    2. for Cooling Fan Motor 300 W + 300 W Type:


      1. B0075TY

        Remove the 5 screws and cooling fan motor.

  16. REMOVE NO. 2 COOLING FAN MOTOR


    1. for Cooling Fan Motor 240 W + 240 W Type:


      1. B0073UQ

        Disconnect the No. 2 cooling fan motor connector.

      2. Disengage the clamp.

      3. B00749M

        Remove the 3 screws and No. 2 cooling fan motor.

    2. for Cooling Fan Motor 300 W + 300 W Type:


      1. B0075VM

        Remove the 5 screws and No. 2 cooling fan motor.