AIR FUEL RATIO SENSOR REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE POWER STEERING ECU ASSEMBLY


  3. REMOVE BATTERY TRAY (for LHD)


    1. B00776H

      Disengage the fuel pipe clamp from the battery tray.

    2. Remove the 2 bolts and battery tray.

  4. REMOVE BATTERY TRAY (for RHD)


    1. B00760A

      Remove the 2 bolts and battery tray.

  5. REMOVE AIR FUEL RATIO SENSOR


    1. for Bank 1:


      1. B007541

        Disconnect the air fuel ratio sensor connector.

      2. Disengage the 2 wire harness clamps.

      3. B0075KXN01

        Using SST, remove the air fuel ratio sensor from the exhaust manifold RH.

        SST
        09224-00010

        Note

        If the air fuel ratio sensor has been struck or dropped, replace it.

    2. for Bank 2:


      1. B0074UC

        Disconnect the air fuel ratio sensor connector.

      2. B0076NFN01

        Using SST, remove the air fuel ratio sensor from the exhaust manifold LH.

        SST
        09224-00010

        Note

        If the air fuel ratio sensor has been struck or dropped, replace it.