IGNITION COIL AND SPARK PLUG REMOVAL

PROCEDURE

1. REMOVE V-BANK COVER SUB-ASSEMBLY

   Click here

2. REMOVE ENGINE ROOM SIDE COVER

   Click here

3. DISCONNECT NO. 2 VENTILATION HOSE

   Click here

4. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

   Click here

5. SEPARATE WIRE HARNESS

   
   

   1. 

      Remove the 2 nuts and separate the wire harness from the cylinder head cover sub-assembly.

   2. 

      Disengage the wire harness clamp from the intake air surge tank assembly.

   3. Remove the 2 bolts and separate the 2 wire harness clamp brackets from the cylinder head cover sub-assembly LH.

6. REMOVE IGNITION COIL ASSEMBLY

   
   

   1. Disconnect the 6 ignition coil assembly connectors.

   2. 

      Remove the 6 bolts and 6 ignition coil assemblies from the cylinder head cover sub-assembly.

      Note

      If an ignition coil assembly has been struck or dropped, replace it.

      Tech Tips

      Arrange the removed parts in the correct order.

7. REMOVE SPARK PLUG

   
   

   1. Remove the 6 spark plugs from the cylinder head sub-assembly.

      Note

      If a spark plug has been struck or dropped, replace it.

      Tech Tips

      Arrange the removed parts in the correct order.