CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE VVT SENSOR (for Intake Side of Bank 1)


    1. B0073V5

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.

      Note

      If the VVT sensor has been struck or dropped, replace it.

  3. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)


    1. B0075SW

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.

      Note

      If the VVT sensor has been struck or dropped, replace it.

  4. REMOVE VVT SENSOR (for Intake Side of Bank 2)


    1. B0074OV

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly LH.

      Note

      If the VVT sensor has been struck or dropped, replace it.

  5. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)


    1. B0077RL

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly LH.

      Note

      If the VVT sensor has been struck or dropped, replace it.