ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

    Tech Tips

    Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.



    1. A01R7EWC01
      *1 Gasket

      Install a new gasket to the engine coolant temperature sensor.

    2. Using SST, install the engine coolant temperature sensor to water outlet sub-assembly.

      SST
      09817-33191

      Note

      If the engine coolant temperature sensor has been struck or dropped, replace it.

      Torque:
      19.6 N*m  { 200 kgf*cm, 14 ft.*lbf }

    3. Connect the engine coolant temperature sensor connector.

  2. INSTALL AIR CLEANER HOSE ASSEMBLY

    Click here

  3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  4. ADD ENGINE COOLANT

    Click here

  5. INSPECT FOR COOLANT LEAK

    Click here

  6. INSTALL CENTER NO. 4 ENGINE UNDER COVER

    Click here

  7. PERFORM INITIALIZATION


    1. Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.