STEERING CONTROL ECU(for LHD) INSTALLATION

PROCEDURE

1. INSTALL FRONT STEERING CONTROL ECU

   
   

   1. Install the front steering control ECU with the 2 bolts.

      Torque:

      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Tech Tips

      Align the positioning boss of the blower assembly with the hole of the front steering control ECU.

   2. Connect the 4 connectors to the front steering control ECU.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

3. INSTALL FRONT NO. 2 CONSOLE BOX INSERT

   Click here

4. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

   Click here

5. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

6. PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION

   Click here