POWER BACK DOOR CONTROL SWITCH INSTALLATION


  1. INSTALL POWER BACK DOOR CONTROL SWITCH (POWER SLIDE DOOR CONTROL SWITCH)


    1. A01CEPO

      Engage the 4 claws to install the power back door control switch (power slide door control switch).

  2. INSTALL MAP LIGHT ASSEMBLY


    1. A01CDNV

      Engage the 4 guides and 5 claws, and install the map light assembly to the roof headlining assembly.

    2. A01CBMH

      Connect the 2 connectors.

    3. Engage the 4 clamps.

    4. Engage the 8 claws.

  3. INSTALL ROOF HEADLINING ASSEMBLY

    Tech Tips

    Refer to the procedure from Install Roof Headlining Assembly Click here.