SLIDE DOOR HALF OPEN STOPPER CONTROL ASSEMBLY INSTALLATION


  1. INSTALL SLIDE DOOR HALF OPEN STOPPER CONTROL ASSEMBLY


    1. Engage the slide door half open stopper control cable from the slide door half open stopper control assembly.

    2. A01CCNG

      Engage the clamp.

    3. Connect the connector.

    4. A01CEKD

      Engage the clip and install the slide door half open stopper control assembly.

    5. Install the nut.

  2. INSTALL REAR QUARTER TRIM PANEL ASSEMBLY LH


    1. Engage the 2 guides, 8 claws and 15 clips, and install the rear quarter trim panel assembly LH.

    2. Install the clip(A).

      A01CEOA

  3. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY (for 60/40 Split Seat Type)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  4. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER (for 60/40 Split Seat Type)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  5. INSTALL DECK SIDE GARNISH LH


    1. A01CFQJE02

      Engage the 4 guides and 12 claws to install the deck side garnish LH as shown in the illustration.

  6. INSTALL ROPE HOOK ASSEMBLY

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  7. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK

    Tech Tips

    Use the same procedure for the No. 2 luggage compartment trim hook and No. 1 luggage compartment trim hook Click here.

  8. INSTALL REAR NO. 2 SEAT ASSEMBLY LH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  9. INSTALL NO. 1 SEAT TRACK LOCK PLATE COVER

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  10. INSTALL UPPER SEAT TRACK RAIL COVER LH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  11. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  12. INSTALL BACK DOOR SCUFF PLATE


    1. A01CCY0

      Engage the 2 guides, 4 clips and 4 claws to install the back door scuff plate.

  13. INSTALL BACK DOOR STRIKER COVER


    1. A01CEXU

      Engage the 2 guides and 4 claws to install the back door striker cover.

  14. CONNECT NO. 1 SLIDE DOOR WEATHERSTRIP LH


    1. A01CC8AE02
      Text in Illustration
      *1 Alignment Mark
      *a White
      *b Light Blue

      Align the alignment marks on the weatherstrip with the protruding portions on the body indicated by the arrows in the illustration, and install the No. 1 slide door weatherstrip LH.

      Note

      After installation, check that the corners fit correctly.

  15. INSTALL REAR DOOR SCUFF PLATE LH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.