SLIDING ROOF SWITCH ASSEMBLY INSTALLATION


  1. INSTALL SLIDING ROOF SWITCH (INTEGRATION CONTROL AND PANEL ASSEMBLY) (for Rear Side)


    1. Connect the connector.

    2. A01CBFQ

      Engage the 5 claws to install the sliding roof switch (integration control and panel assembly).

  2. INSTALL SLIDING ROOF SWITCH (POWER SLIDE DOOR CONTROL SWITCH) (for Front Side)


    1. A01CEPO

      Engage the 4 claws to install the sliding roof switch (power slide door control switch).

  3. INSTALL MAP LIGHT ASSEMBLY (for Front Side)


    1. A01CDNV

      Engage the 4 guides and 5 claws, and install the map light assembly to the roof headlining assembly.

    2. A01CBMH

      Connect the 2 connectors.

    3. Engage the 4 clamps.

    4. Engage the 8 claws.

  4. INSTALL ROOF HEADLINING ASSEMBLY (for Front Side)

    Tech Tips

    Refer to the procedure from Install Roof Headlining Assembly Click here.