SEAT HEATER SWITCH INSTALLATION


  1. INSTALL SEAT HEATER SWITCH (for Driver Side)


    1. Engage the 2 claws to install the seat heater switch.

  2. INSTALL NO. 2 SWITCH HOLE BASE (for Driver Side)


    1. Connect the aspirator pipe and each connector.

    2. Engage the 4 claws to install the No. 2 switch hole base.

      A01CDQLE01

  3. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Driver Side)

    for RHD: Click here

    for LHD: Click here

  4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Driver Side)


    1. Connect the connector.

    2. A01CBOAE01

      Engage the 23 claws to install the center instrument cluster finish panel sub-assembly.

      Note


      • When installing the center instrument cluster finish panel sub-assembly, make sure to press the upper middle part firmly.

      • Make sure that the claws are fully engaged.

    3. Remove the applied protective tape.

    4. Move the shift lever to P.

  5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Driver Side)


    1. A01CGCS

      Turn the shift lever knob clockwise to install the shift lever knob sub-assembly.

  6. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Driver Side)


    1. A01CG2C

      Engage the 15 claws.

      Tech Tips

      Before engaging the 15 claws, make sure that the claws are positioned correctly.

      Note

      Make sure that the claws are fully engaged.

    2. Install the instrument cluster finish panel assembly with the bolt <C>.

  7. INSTALL CENTER FLOOR CARPET COVER LH (for Driver Side)


    1. A01CF5Y

      Engage the 4 claws.

    2. A01CG2A

      Install the center floor carpet cover LH with the clip.

  8. INSTALL CENTER FLOOR CARPET COVER RH (for Driver Side)

    for RHD: Click here

    for LHD: Click here

  9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for Driver Side)

    for RHD: Click here

    for LHD: Click here

  10. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Driver Side)

    for RHD: Click here

    for LHD: Click here

  11. INSTALL COWL SIDE TRIM BOARD (for Driver Side)

    for RHD: Click here

    for LHD: Click here

  12. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL (for Driver Side)


    1. A01CEO2

      Engage the 11 claws and 2 guides to install the No. 1 instrument cluster finish panel.

    2. A01CDZ6E01

      Remove the protective tape from the steering column cover.

  13. INSTALL SEAT HEATER SWITCH (for Front Passenger Side)


    1. Engage the 2 claws to install the seat heater switch.

  14. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Front Passenger Side)


    1. Connect the connector.

    2. A01CBOAE01

      Engage the 23 claws to install the center instrument cluster finish panel sub-assembly.

      Note


      • When installing the center instrument cluster finish panel sub-assembly, make sure to press the upper middle part firmly.

      • Make sure that the claws are fully engaged.

    3. Remove the applied protective tape.

    4. Move the shift lever to P.

  15. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Front Passenger Side)


    1. A01CGCS

      Turn the shift lever knob clockwise to install the shift lever knob sub-assembly.